Forcepoint V5000 G5 R2
Web or Email Security Appliance
Plan your deployment before setting up the appliance. See the back of this guide for a deployment overview and reference sheet.
Bezel (faceplate)
Contact Forcepoint Technical Support if any items are missing.
To mount the V5000 appliance, use the Static Ready Rail Kit provided.
See the Rack Installation Instructions included in the Static Ready Rail Kit for more details.
The appliance supports the following security modes:
Based on your subscription, select the appropriate security mode for this appliance.
Connect the appliance interfaces required by the security mode for this appliance. Cat 5E cables (or better) are required. Do not use crossover network cables.
| Web | ||
|---|---|---|
| Required Ports: | CP1N | CP1 |
| Optional Ports: | P2iDRAC | P2iDRAC |
| Interface | Function |
|---|---|
| C |
|
| P1 |
|
| P2 | |
| N |
|
| iDRAC |
|
Connect to the appliance via Virtual Console feature of iDRAC or directly via KVM in order to access the command line interface for initial configuration.
Power on the appliance and check the following indicators:
Contact Forcepoint Technical Support if any indicators are not illuminated correctly.
Please refer to the Forcepoint Appliances Getting Started guide for more details.
Forcepoint
V5000 G5 R2
701-V5KG5R2-00_RevA
You can deploy one or more appliances on your network. The diagram below illustrates a basic appliance deployment. A separate host with Windows Server is required for running Forcepoint Security Manager.
admin is the default user name for the Appliance CLI, Forcepoint Security Manager, and Content Gateway Manager.
Above settings apply to P1 and P2