Upgrading Forcepoint CASB Endpoint (Forcepoint F1E)

If you have installed Forcepoint CASB Endpoint v20.07 or later through the Forcepoint F1E package builder, you can upgrade through the latest package builder.

Steps

  1. Download the latest package builder from the Forcepoint Support site:
    1. Log on to the Forcepoint Downloads page.
    2. Go to Endpoint Security > Forcepoint One Endpoint, select a version, and then download the package builder.
  2. Run WebsenseEndpointPackageBuilder.exe to generate a new Forcepoint CASB Endpoint installation package.
  3. Forcepoint CASB Endpoint installation package requires Forcepoint DLP Endpoint, so make sure that Forcepoint DLP Endpoint is checked on the Select Forcepoint One Endpoint Components screen. For more information about configuring Forcepoint DLP Endpoint, see Upgrading Forcepoint DLP Endpoint.
  4. On the Configuration screen, complete the following fields to configure Forcepoint CASB Endpoint:
    • Hostname of the Forcepoint CASB Gateway or load balancer: Enter the name (not the IP address) of your organizational Forcepoint CASB gateway. If you do not know the name of your gateway, open Forcepoint CASB, then go to Settings > Resources > Assets >any asset> Access Mapping. The gateway name is shown under Forcepoint CASB proxy URL.
    • Port: Enter the port number for the organizational Forcepoint CASB gateway. The default is 443.
    • Range of ports available for host-internal communications: Enter the Min and Max values for the range of ports that Forcepoint CASB Endpoint can use for host-internal communications with local client applications.
    • Verification domains: Enter one or more domains to be used in DNS requests to identify if the endpoint machine is on a known, or safe, network. Separate domains with a comma. For example, domain1.com@0.0.0.0,domain2.com@255.255.255.255.
    • CASB certificate file to install: Enter the location, or Browse to the file location, of the certificate file (in .pfx format) to be installed with Forcepoint CASB Endpoint. This certification authenticates Forcepoint CASB Endpoint on the endpoint machine to the Forcepoint CASB server.
    • Certificate password: Enter the password for the certificate file. The password characters are hidden by default. To see the password characters as you type, select Show characters.
  5. Deploy the v23.11 installation package to each endpoint machine using one of the methods described in the Installation and Deployment Guide for Forcepoint F1E.