Removing the switch I/O modules from the A1/A2 slot

The Forcepoint X10G Appliance is a blade server scaled from 1 to 16 security blades within a 10U extensible chassis architecture. It comes with two switch I/O modules in the back of the chassis for network connectivity. The X10G HA Kit consists of two stacking modules and two stacking cables. It is used to stack two switch I/O modules into one logic unit for high availability.

Repeat these steps for the A1 and A2 slots outside the X10G chassis.

Steps

  1. Disconnect any cables from the back of the switch.
  2. Remove the switch I/O module by gently pushing the orange latch upward.
  3. Pull the switch I/O module out using the gray metal piece at the bottom.