Installing the crawler agent

Steps

  1. Download the Forcepoint Security Installer (ForcepointDLP891Setup.exe) from the My Account > Downloads page at support.forcepoint.com.
  2. Launch the installer.
  3. Accept the license agreement.
  4. Select Custom.
  5. Click the Install link for Forcepoint DLP.
  6. On the Welcome screen, click Next to begin the installation.
  7. In the Destination Folder screen, specify the folder into which to install the agent.
    The default destination is C:\Program Files or Program Files (x86)\Websense\Data Security. If you have a larger drive, it is used instead. Large removable drives may be detected by the system as a local drive and used as the default. Do not install on removable media.
    Important: The full installation path must use only ASCII characters. Do not use extended ASCII or double-byte characters.
    Note: Regardless of what drive you specify, the machine must have a minimum of 0.5 GB of free disk space on the C: drive.
  8. On the Select Components screen, select Crawler agent and then Entire feature will be installed on local hard drive. If this is a stand-alone installation, deselect all other options, including Forcepoint DLP Server.
  9. In the Server Access screen, select the IP address to identify this machine to other Forcepoint components.
    The following message may appear:

    Forcepoint Data Discovery Agent works with a specific version of WinPcap. The installation has detected that your WinPcap version is <version> In order to proceed with this installation, WinPcap version 4.0.0.1040 needs to be installed and will replace yours. Click Yes to proceed or Click No to preserve your WinPcap version and deselect the Discovery Agent Feature to continue with the installation.

    “Discovery Agent” refers to the crawler agent. The particular version of WinPcap mentioned in this message must be in place to install Crawler Agent. Note that after installation of the crawler agent you can install a different version of WinPcap. The crawler agent should continue to work properly.

  10. In the Register with the Forcepoint DLP Server screen specify the path and log on credentials for the Forcepoint DLP server to which this agent will connect. This could be the management server or a secondary Forcepoint DLP server.

    FQDN is the fully-qualified domain name of a machine.

  11. In the Local Administrator screen, enter a user name and password as instructed on-screen. The server/host name portion of the user name cannot exceed 15 characters.
  12. If you installed a Lotus Notes client on this machine so you can perform fingerprinting and discovery on a Lotus Domino server, the Lotus Domino Connections screen appears.

    If you plan to perform fingerprinting or discovery on your Domino server, complete the information on this page.

    Important:

    Before you complete the information on this screen, make sure that you:

    • Create at least one user account with administrator privileges for the Domino environment. (Read permissions are not sufficient.)
    • Be sure that the Lotus Notes installation is done for “Anyone who uses this computer.”
    • Connect to the Lotus Domino server from the Lotus Notes client.
    1. On the Lotus Domino Connections page, select the check box labeled Use this machine to scan Lotus Domino servers.
    2. In the User ID file field, browse to one of the authorized administrator users, then navigate to the user’s user.id file.
      Note: Select a user that has permission to access all folders and Notes Storage Format (NSF) files of interest, otherwise certain items may not be scanned.
    3. In the Password field, enter the password for the authorized administrator user.
  13. In the Installation Confirmation screen, if all the information entered is correct, click the Install button to begin installation.
    Installation may seem to take a long time. Unless a specific error or failure message appears, allow the installer to proceed.

    If the following message appears, click Yes to continue the installation:

    Forcepoint DLP needs port 80 free.

    In order to proceed with this installation, DSS will free up this port. Click Yes to proceed OR click No to preserve your settings.

    Clicking No cancels the installation.

    A similar message for port 443 may appear. Click Yes to continue or No to cancel the installation.

  14. Once installation is complete, the Installation Complete screen appears to inform you that your installation is complete. Click Finish.
  15. Once installation is complete, the Installation Successful screen appears to inform you that your installation is complete.

    For information on configure the crawler, see “Configuring the crawler” in the Data Security Manager Help system.