Step 2: Configure the installation

Steps

  1. Use the Destination Folder screen to either accept the default installation folder (C:\Program Files\Websense\Data Security) or specify a custom folder.
    • If the machine has multiple drives, and one is larger than the C drive, the larger drive is used instead.
    • Large removable drives may be detected by the system as a local drive and used as the default. Do not install on removable media!
    Important: The full installation path must use only ASCII characters. Do not use extended ASCII or double-byte characters.
    Note: Regardless of what drive you specify, the machine must have a minimum of 4 GB of free disk space on the Windows partition for the Forcepoint Security Installer.
  2. On the Select Components screen, select Forcepoint DLP Server.
  3. On the Fingerprinting Database screen, accept the default database location, or click Browse to select another location.
  4. Use the Server Access screen to select the IP address to use to identify this machine to other Forcepoint components.
  5. Use the Register with the Forcepoint DLP Server screen to specify the location and logon credentials for the management server.
    • FQDN is the fully-qualified domain name of the management server machine.
    • Provide the credentials of a Forcepoint DLP administrator with System Modules permissions.
  6. In the Local Administrator screen, supply an administrator user name and password as instructed. The server/hostname portion of the user name cannot exceed 15 characters.
  7. If a Lotus Notes client is installed on this machine (to allow fingerprinting and discovery on a Lotus Domino server), the Lotus Domino Connections screen appears. To enable Lotus Domino fingerprinting and discovery:
    Note: Before completing the information on this screen, be sure the prerequisites described in Supplemental server prerequisites,(mentioned below) have been met.
    1. Select Use this machine to scan Lotus Domino servers.
    2. Browse to the User ID file (user.id) of an authorized administrator user.
      Note: Select a user that has permission to access all folders and Notes Storage Format (NSF) files of interest, otherwise certain items may not be scanned.
    3. Enter the Password for the authorized administrator user.