Send commands to Virtual Secure SD-WAN Engines

Commands to Virtual Secure SD-WAN Engines are sent from the command line of the Master Engine that hosts the Virtual Secure SD-WAN Engines.

All command-line tools that are available for single Secure SD-WAN Engines are also available for Virtual Secure SD-WAN Engines that have the same role.

Steps

  1. Connect to the command line on the Master Engine.
  2. Enter commands in the following format:
    se-virtual-engine [options]
    Table 1. Options for se-virtual-engine Command
    Option Description
    -h | --help Shows the help message for the se-virtual-engine command.
    -l | --list Lists the active Virtual Secure SD-WAN Engines.

    -v <ID> |

    --virtual-engine=<ID>

    Specifies the ID of the Virtual Engine on which to execute the command.
    -e | --enter Enters the command shell for the Virtual Engine specified with the -v or --virtual-engine option. To exit the command shell, type exit. Using the command shell is recommended if you want to send multiple commands to the Virtual Engine.

    -E “<command [options]>” |

    --execute=”<command [options]>”

    Executes the specified command on the Virtual Engine specified with the -v or --virtual-engine option. Executing individual commands is recommended if you only want to send a few commands to the Virtual Engine. You can also execute individual commands to send the same command to multiple Virtual Secure SD-WAN Engines.