Secure SD-WAN 7.1 Online Help

Home
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic and inspecting the content of traffic.
Inspection Policy elements
Inspection Policy elements define how the engines look for patterns in traffic allowed through the Access rules and what happens when a certain type of pattern is found.
How Inspection Policy elements are designed
Inspection Policy elements activate checks for specific traffic patterns and define what action the engine takes when a match is found.
Inspection categories
Inspection categories are grouped into Threat and Traffic Identification categories.

Latest online help
Link to the latest FlexEdge Secure SD-WAN online documentation.
About this Help
This online help was created for Forcepoint FlexEdge Secure SD-WAN, version 7.1.0.
Introduction to the Forcepoint FlexEdge Secure SD-WAN solution
Before setting up Forcepoint FlexEdge Secure SD-WAN, it is useful to know what the different components do and what engine roles are available.
Deployment
Before you can set up the system and start configuring elements, you must consider how the different SMC components should be positioned and deployed.
Setting up
After deploying the SMC components, you are ready to start using the Management Client and carrying out some of the first configuration tasks.
Monitoring
You can use the SMC to monitor system components and third-party devices. You can also view and filter logs, and create Reports from them.
Controlling Secure SD-WAN Engines
You can command and set options for engines through the Management Client or on the engine command line. You can also stop traffic manually.
SMC configuration
SD-WAN Manager configuration allows you to customize how the SMC components work.
Secure SD-WAN Engine configuration
You can create and modify Engines, IPS engines, Layer 2 Engines, Master Engines and Virtual Secure SD-WAN Engines. You can configure the Secure SD-WAN Engine properties, activate optional features, and configure advanced Secure SD-WAN Engine settings.
Routing
Use the Management Client to configure static or dynamic routing, and use a Multi-Link configuration to manage and distribute inbound and outbound connections.
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic and inspecting the content of traffic.
- Creating and managing policy elements
  Policy elements are containers for the rules that determine how Secure SD-WAN Engines, Master Engines, and Virtual Engines examine traffic. The policy elements for the engines include Template Policies, Policies, and Sub-Policies.
- Ethernet rules
- Access rules
  Access rules are lists of matching criteria and actions that define how the engine treats different types of network traffic. They are your main configuration tool for defining which traffic is stopped and which traffic is allowed.
- NAT rules
- Inspection Policy elements
  Inspection Policy elements define how the engines look for patterns in traffic allowed through the Access rules and what happens when a certain type of pattern is found.
  - Inspection Policy elements and how they work
    Inspection Policy elements define how the main traffic analysis is done for traffic that has been allowed and selected for deep inspection in the Access rules. They define what action the engine takes when a match is found.
  - How Inspection Policy elements are designed
    Inspection Policy elements activate checks for specific traffic patterns and define what action the engine takes when a match is found.
    - Verifying and tuning Inspection Policy elements
      Tuning increases the relevancy and accuracy of the findings that the system generates.
    - Rule order for Inspection Policy elements
      The rules in Inspection Policy elements are read from the top down. More specific rules must be placed above more general rules that match the same traffic.
    - Inspection on Master Engines and Virtual Engines
      One shared inspection process running on the Master Engine handles the inspection and correlation for all Virtual Engines associated with the Master Engine.
    - Default elements for Inspection Policy elements
      Default Inspection Policy elements are introduced when you import and activate a dynamic update package. The rules in the Inspection Policy Templates can change when you activate new update packages.
    - Activating deep inspection in Access rules
      Action options in the Access rules define which traffic is inspected against the Inspection Policy.
    - Activating the relevant inspection checks
      The Rules tree is the main tool for controlling deep inspection.
    - Inspection categories
      Inspection categories are grouped into Threat and Traffic Identification categories.
      - Threat categories
      - Traffic identification categories
    - Defining Exception rules in Inspection Policy elements
      Exception rules in Inspection Policy elements allow you to make changes to the Inspection Policy that are not applied to all connections.
    - Tuning Inspection Policy elements to eliminate false positives
      False positives are matches to rules and exceptions in Inspection Policy elements that are incorrect or irrelevant in your environment.
  - Set default options for Exception rules in Inspection Policy elements
    The Continue action allows you to set default values for some settings in Exception rules to avoid defining the same settings for several rules individually.
  - Example: Tuning an Inspection Policy element to eliminate false positives for a engine
    An example of using Exception rules in the Inspection Policy element to eliminate a false positive.
- Snort inspection on Secure SD-WAN Engines
  The Snort open source intrusion prevention system is integrated into Forcepoint Secure SD-WAN. You can import externally created Snort configurations into Forcepoint Secure SD-WAN to use Snort rule sets for inspection.
- Editing policies
  The rules in Engine, IPS, Layer 2 Engine, and Layer 2 Interface Policies allow you to control how the engines inspect and filter network traffic, and how NAT (network address translation) is applied on Engines, Master Secure SD-WAN Engines, and Virtual Engines.
- Defining IP addresses
  When you define IP addresses as elements, you can use the same definitions in multiple configurations for multiple components.
- Working with Service elements
  Service elements match traffic based on protocol or port and set options for advanced inspection of traffic. Service elements are used in Engine Policies, IPS Policies, Layer 2 Engine Policies, and Layer 2 Interface Policies.
- Defining Situation elements
  Situation elements contain the context information that defines the pattern that the Secure SD-WAN Engine looks for in the inspected traffic. Situation elements also define the patterns that match events in the traffic.
- Using Network Application elements
  Network Application elements collect combinations of identified characteristics and detected events in traffic to dynamically identify traffic related to the use of a particular network application.
- Defining User Response elements
  With the User Response element, you can send customized replies to users, instead of just closing an HTTP or HTTPS connection.
- Quality of Service
  The Quality of Service (QoS) features allow you to manage bandwidth and prioritize connections on the Secure SD-WAN Engines. QoS features are available on Engines, IPS Secure SD-WAN Engines, Layer 2 Engines, Master Engines, Virtual Engines, Virtual IPS Secure SD-WAN Engines, and Virtual Layer 2 Engines.
- Anti-malware scanning
  An anti-malware scanner compares network traffic against an anti-malware database to search for viruses and other malware. If malware is found, the traffic is stopped or content is stripped out.
- File filtering
  Monitoring and restricting what data is sent out is an important part of data loss prevention (DLP). File filtering allows you to restrict the file types that are allowed in and out through the engine, and to apply malware detection to files.
- Integrating Forcepoint One Endpoint with Secure SD-WAN
  If you have installed Forcepoint One Endpoint clients on the endpoints in your network, you can collect information about endpoint clients, and use the information for access control in the SMC.
- Filtering URLs
  URL filtering allows you to filter URLs based on categories of content or lists of individual URLs.
- Protocol Agents on Secure SD-WAN Engines
  Protocol elements of the Protocol Agent type are special modules for some protocols and services that require advanced processing. Protocol Agents can enforce policies on the application layer.
- Sidewinder Proxies
  Sidewinder Proxies are software modules that provide network level proxies, protocol validation, and configurable application level protocol filtering and translation on Forcepoint FlexEdge Secure SD-WAN.
- Setting up TLS inspection
  The TLS inspection feature decrypts TLS connections so that they can be inspected for malicious traffic and then re-encrypts the traffic before sending it to its destination.
- Setting up QUIC inspection
  QUIC is a secure general-purpose transport protocol. QUIC combines encryption and transport layer data stream processing into one protocol, thereby, reduces latency and improves security.
- Forward traffic to a proxy service for external inspection
  In addition to inspecting traffic on the Secure SD-WAN Engine, you can transparently forward traffic to a proxy service in the cloud or on premises. For example, you can forward all HTTP and HTTPS traffic to the Forcepoint Web Security Cloud service.
- Block listing IP addresses
  Block listing is a way to temporarily block unwanted network traffic either manually or automatically with block list requests from an Secure SD-WAN Engine or Log Server. Engines, IPS engines, Layer 2 Engines, and Virtual Engines can use a block list for blocking traffic.
Users and authentication
User accounts are stored in internal databases or external directory servers. You can use Secure SD-WAN in the Engine/VPN role or external authentication servers to authenticate users.
Virtual private networks
Secure SD-WAN supports both policy-based and route-based VPN tunnels between VPN gateways. For full remote access, Secure SD-WAN supports both IPsec and SSL VPN tunnels for VPN clients.
Maintenance and upgrades
Maintenance includes procedures that you do not typically need to do frequently.
Troubleshooting
Troubleshooting helps you resolve common problems in the Secure SD-WAN and SMC.
Appendices

Inspection categories

Inspection categories are grouped into Threat and Traffic Identification categories.

Threat categories
Traffic identification categories

Copyright © 2024 Forcepoint LLC