Create a Policy-Based VPN element

Create a Policy-Based VPN element and define the properties for the element.

For more details about the product and how to configure features, click Help or press F1.

Steps

  1. Select Configuration, then browse to Secure SD-WAN.
  2. Browse to Policy-Based SD-WANs.
  3. Right-click Policy-Based SD-WANs, then select New Policy-Based SD-WAN.
  4. Configure the settings, then click OK.
    The Policy-Based SD-WAN opens for editing.

Next steps

Define the VPN topology.

Policy-Based SD-WAN Properties dialog box

Use this dialog box to change the properties of a Policy-based VPN.

Option Definition
Name The name of the element.
Default SD-WAN Profile Specifies the default VPN profile for the VPN.

By default, this profile is used for all tunnels, but you can override the selection for individual tunnels.

Link Usage Profile

(Optional)

To use dynamic link selection for Multi-Link VPNs, select a Link Usage Profile element.

When you select a Link Usage Profile element in the properties of a policy-based VPN, route-based VPN tunnel group, or a VPN broker domain, the settings defined in the Link Usage Profile element are applied to all tunnels in the VPN according to their link types.

DSCP QoS Policy

(Optional)

Defines how DSCP matching or marking is done for VPN traffic in one of the following ways:
  • Select an existing QoS Policy from the list.
  • Select Select, then select an existing QoS Policy or click Tools > New to create a QoS Policy.
Apply NAT to traffic that uses this SD-WAN

(Optional)

Select this option if you want the NAT rules in the Engine Policy to apply to traffic that it sends into or receives from the VPN, or if you want to use the NAT Pool feature to translate VPN client connections. This option affects the traffic that is transported inside the tunnels. This option does not affect the tunnel negotiations or the encrypted packets between gateways. These communications are always matched to NAT rules.
Category

(Optional)

Includes the element in predefined categories. Click Select to select a category.
Comment

(Optional)

A comment for your own reference.