Define exceptions to the Link Usage Profile for an Secure SD-WAN Engine

Secure SD-WAN Engine-specific exceptions to the Link Usage Profile allow you specify which traffic uses specific NetLinks.

Before you begin

Select a Link Usage Profile element for the Secure SD-WAN Engine.

For example, if you do not want some traffic to be balanced between the NetLinks, add an exception to direct the traffic through a specific NetLink.

For more details about the product and how to configure features, click Help or press F1.

Steps

  1. Select Configuration.
  2. Right-click an Secure SD-WAN Engine, then select Edit <element type>.
  3. Browse to Routing > Link Usage.
  4. To add a row the Exceptions to Link Usage Profile table, click Add, then define the matching criteria.
  5. Click Save and Refresh.

Engine Editor > Routing > Link Usage

Use this branch to select a Link Usage Profile for an Secure SD-WAN Engine and to define link usage exceptions for the Secure SD-WAN Engine.

Option Definition
Link Usage Profile To enable dynamic link selection for the Secure SD-WAN Engine, select a Link Usage Profile element.
Link Usage Profile Properties (read only)

(Not editable)

Shows the properties of the selected Link Usage Profile element.
Exceptions to Link Usage Profile table (When a Link Usage Profile element has been selected)

Click Add to add a row to the table, or Remove to remove the selected row.

Click Up or Down to move the selected item up or down.

Source The source IP addresses or users that the rule matches.

Double-click the cell to select an element. You can also use type-ahead search to select an element.

Destination The destination IP addresses or users that the rule matches.

Double-click the cell to select an element. You can also use type-ahead search to select an element.

Service The service or Network Application that the rule matches.

Double-click the cell to select an element. You can also use type-ahead search to select an element.

ISP Link The NetLink that traffic that matches the rule uses.

Double-click the cell to select an element.

Comment

(Optional)

A comment for your own reference.