Content migration in progress, completing by midnight IST on 17 November 2026.
Home
Secure SD-WAN Engine configuration
You can create and modify Engines, IPS engines, Layer 2 Engines, Master Engines and
Virtual Secure SD-WAN Engines. You can configure the Secure SD-WAN Engine properties, activate optional features, and
configure advanced Secure SD-WAN Engine settings.
Add-on features for Secure SD-WAN Engines
There are several add-on features that you can use on Engines, IPS engines, Layer
2 Engines, Virtual Engines, Virtual IPS engines, and Virtual Layer 2 Engines.
Latest online help
Link to the latest FlexEdge Secure SD-WAN online documentation .
About this Help
This online help was created for Forcepoint FlexEdge Secure SD-WAN , version 7.2.x .
Introduction to the Forcepoint FlexEdge Secure SD-WAN solution
Before setting up Forcepoint FlexEdge Secure SD-WAN , it is useful to know what the different components do and what engine roles are
available.
Deployment
Before you can set up the system and start configuring elements, you must consider
how the different SMC components should be positioned and deployed.
Setting up
After deploying the SMC components, you are ready to start using the Management Client and carrying out
some of the first configuration tasks.
Monitoring
You can use the SMC to monitor system components and third-party devices. You can also view and filter
logs, and create Reports from them.
Controlling Secure SD-WAN Engines
You can command and set options for engines through the Management Client or on the
engine command line. You can also stop traffic manually.
SMC configuration
SD-WAN Manager configuration allows you to customize how the SMC components work.
Secure SD-WAN Engine configuration
You can create and modify Engines, IPS engines, Layer 2 Engines, Master Engines and
Virtual Secure SD-WAN Engines. You can configure the Secure SD-WAN Engine properties, activate optional features, and
configure advanced Secure SD-WAN Engine settings.
Creating and modifying Secure SD-WAN Engines
Secure SD-WAN Engine elements contain the configuration information that is directly related to
the Engines, IPS engines, and Layer 2 Engines. The configuration information
includes interface definitions, cluster mode selection, tester settings, and other
options specific to the Secure SD-WAN Engine.
Creating and modifying Master Engine and Virtual Engine elements
Virtual Engines are logically separate Secure SD-WAN Engines that run as virtual instances on a physical Secure SD-WAN appliance. A Master Engine is a physical appliance that provides resources for Virtual
Engines.
Network interface configuration
The network interface configuration for Secure SD-WAN Engines is stored on the Management Server in the properties of Single Engine,
Engine Cluster, Single IPS, IPS Cluster, Single Layer 2 Engine, Layer 2 Engine Cluster,
Master Secure SD-WAN Engine, and Virtual Engine elements.
Connecting Secure SD-WAN Engines to the SMC
To maintain the security of your system, the Secure SD-WAN Engines establish an authenticated and encrypted connection with Log Servers and
Management Servers.
Element-based network address translation (NAT)
Element-based NAT allows you to define NAT addresses in the properties of an element.
The NAT definitions define how engines translate network IP addresses.
Configuring the Secure SD-WAN Engine tester
The Secure SD-WAN Engine tester runs various checks on the Secure SD-WAN Engine and initiates responses based on the success or failure of these
tests.
Engine permissions
You can set permissions to control the administration of the engines.
DNS Relay
DNS relay allows the engine to provide DNS services for clients in internal networks.
Setting up SNMP for Secure SD-WAN Engines
SNMP is a standard protocol that different equipment can use to send network management-related
information to each other. You can configure Secure SD-WAN Engines to send SNMP traps to external equipment.
Setting up LLDP for Secure SD-WAN Engines
Network devices can use the Link Layer Discovery Protocol (LLDP) to advertise their
identity, capabilities, and neighbors on a local area network.
Alias element translations for Secure SD-WAN Engines
Alias elements can be used to represent other network elements in configurations.
The value an Alias takes in a configuration can be different on each Secure SD-WAN Engine where the Alias is used.
Add-on features for Secure SD-WAN Engines
There are several add-on features that you can use on Engines, IPS engines, Layer
2 Engines, Virtual Engines, Virtual IPS engines, and Virtual Layer 2 Engines.
Advanced Secure SD-WAN Engine settings
Advanced settings cover various system parameters related to different features.
Routing
Use the Management Client to configure static or dynamic routing, and use a Multi-Link
configuration to manage and distribute inbound and outbound connections.
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic
and inspecting the content of traffic.
Users and authentication
User accounts are stored in internal databases or external directory servers. You
can use Secure SD-WAN in the Engine/VPN role or external authentication servers to authenticate users.
Virtual private networks
Secure SD-WAN supports both policy-based and route-based VPN tunnels between VPN gateways. For
full remote access, Secure SD-WAN supports both IPsec and SSL VPN tunnels for VPN clients.
Maintenance and upgrades
Maintenance includes procedures that you do not typically need to do frequently.
Troubleshooting
Troubleshooting helps you resolve common problems in the Secure SD-WAN and SMC .
Appendices
Add-on features for Secure SD-WAN Engines
There are several add-on features that you can use on Engines, IPS engines, Layer 2 Engines, Virtual Engines, Virtual IPS engines, and Virtual Layer 2 Engines.