Install a Web Access Server
Continue the installation in the Installation Wizard to configure the options for the Web Access Server. The Web Access Server provides restricted access to log data, reports, and policy snapshots.
Steps
Configure the settings, then click Next.
| Option | Description |
|---|---|
| Select Web Access Server IP Address | Select the server’s IP address from the drop-down list. If you use IP address binding, the server’s license must be generated with this IP address as the binding. |
| IP Address(es) of the Management Server(s) that will control this Web Access Server | Enter the IP address of the Management Server that controls this server. If there are multiple Management Servers, enter the IP addresses as a comma-separated list. |
| Certify the Web Access Server during the installation | When selected, the server is automatically certified. If the components are installed on different computers and the Management Server is not immediately contactable, deselect this option to avoid connection attempts after installation. Certifying is mandatory for running the server. |
| Log Server IP Address | Enter the IP address of the Log Server to which this server sends its log data. |
| Enable FIPS Configuration Restrictions | When selected, restrictions for a FIPS-compatible environment are enabled. Note: This option only is for environments that are required to
follow FIPS standards. Do not enable this option unless you have a specific reason to do so.
|
| Install the Web Access Server as a Service | When selected, the server starts automatically. |