Network Security Platform 7.3.0 Online Help

Home
Setting up
After deploying the SMC components, you are ready to start using the SMC Client and carrying out some of the first configuration tasks.

About this Help
This online help was created for Forcepoint Network Security Platform, version 7.3.0.
Introduction to the Forcepoint Network Security Platform solution
Before setting up Forcepoint Network Security Platform, it is useful to know what the different components do and what engine roles are available.
Deployment
Before you can set up the system and start configuring elements, you must consider how the different SMC components should be positioned and deployed.
Setting up
After deploying the SMC components, you are ready to start using the SMC Client and carrying out some of the first configuration tasks.
- Using the SMC Client
  The SMC Client provides the user interface for setting up, managing, and monitoring all features in the SMC.
- Network address translation (NAT) and how it works
  Network address translation (NAT) means changing the IP address or port information in packets. Most often, NAT is used to allow internal hosts to communicate via networks where their actual address is not routable and to conceal the internal network structure from outsiders.
- Configuring system communications
  System communications involve traffic between SMC components, traffic between SMC components and external components that are a part of the system configuration, and external access into the system.
- Managing certificates for system communications
  Certificates are proof of identity that SMC components and Security Engines use to authenticate themselves in communications.
- Managing elements
  Certain tasks are common to most elements. Some of these tasks are not mandatory for defining an element, but are still helpful as you get your SMC up and running.
Monitoring
You can use the SMC to monitor system components and third-party devices. You can also view and filter logs, and create Reports from them.
Controlling Security Engines
You can command and set options for engines through the SMC Client or on the engine command line. You can also stop traffic manually.
SMC configuration
SMC Manager configuration allows you to customize how the SMC components work.
Security Engine configuration
You can create and modify Engines, IPS engines, Layer 2 Engines, Master Engines and Virtual Security Engines. You can configure the Security Engine properties, activate optional features, and configure advanced Security Engine settings.
Routing
Use the SMC Client to configure static or dynamic routing, and use a Multi-Link configuration to manage and distribute inbound and outbound connections.
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic and inspecting the content of traffic.
Users and authentication
User accounts are stored in internal databases or external directory servers. You can use Forcepoint Network Security Platform in the Engine/VPN role or external authentication servers to authenticate users.
Virtual private networks
Forcepoint Network Security Platform supports both policy-based and Route-based Tunnels between VPN gateways. For full remote access, Forcepoint Network Security Platform supports both IPsec and SSL VPN tunnels for VPN clients.
Maintenance and upgrades
Maintenance includes procedures that you do not typically need to do frequently.
Troubleshooting
Troubleshooting helps you resolve common problems in the Forcepoint Network Security Platform and SMC.
Appendices

Setting up

After deploying the SMC components, you are ready to start using the SMC Client and carrying out some of the first configuration tasks.

Using the SMC Client
The SMC Client provides the user interface for setting up, managing, and monitoring all features in the SMC.
Network address translation (NAT) and how it works
Network address translation (NAT) means changing the IP address or port information in packets. Most often, NAT is used to allow internal hosts to communicate via networks where their actual address is not routable and to conceal the internal network structure from outsiders.
Configuring system communications
System communications involve traffic between SMC components, traffic between SMC components and external components that are a part of the system configuration, and external access into the system.
Managing certificates for system communications
Certificates are proof of identity that SMC components and Security Engines use to authenticate themselves in communications.
Managing elements
Certain tasks are common to most elements. Some of these tasks are not mandatory for defining an element, but are still helpful as you get your SMC up and running.

Copyright © 2025 Forcepoint LLC