Content migration in progress, completing by midnight IST on 17 November 2026.
Home
NGFW Engine configuration
You can create and modify Firewalls, IPS engines, Layer 2 Firewalls, Master NGFW Engines and Virtual NGFW Engines. You can configure the NGFW Engine properties, activate optional features, and
configure advanced NGFW Engine settings.
Creating and modifying Master NGFW Engine and Virtual NGFW Engine elements
Virtual NGFW Engines are logically separate NGFW Enginess that run as virtual instances on a physical NGFW appliance. A Master NGFW Engine is a physical appliance that provides resources for Virtual NGFW Engines.
About this Help
This online help was created for Forcepoint Next Generation Firewall (Forcepoint NGFW) , version 6.11 .0.
Introduction to the Forcepoint Next Generation Firewall solution
Before setting up Forcepoint Next Generation Firewall (Forcepoint NGFW) , it is useful to know what the different components do and what engine roles are
available.
Deployment
Before you can set up the system and start configuring elements, you must consider
how the different SMC components should be positioned and deployed.
Setting up
After deploying the SMC components, you are ready to start using the Management Client and carrying out
some of the first configuration tasks.
Monitoring
You can use the SMC to monitor system components and third-party devices. You can also view and filter
logs, and create Reports from them.
Controlling NGFW Engines
You can command and set options for engines through the Management Client or on the
engine command line. You can also stop traffic manually.
SMC configuration
Security Management Center (SMC) configuration allows you to customize how the SMC components work.
NGFW Engine configuration
You can create and modify Firewalls, IPS engines, Layer 2 Firewalls, Master NGFW Engines and Virtual NGFW Engines. You can configure the NGFW Engine properties, activate optional features, and
configure advanced NGFW Engine settings.
Creating and modifying NGFW Engines
NGFW Engine elements contain the configuration information that is directly related to
the Firewalls, IPS engines, and Layer 2 Firewalls. The configuration information
includes interface definitions, cluster mode selection, tester settings, and other
options specific to the NGFW Engine.
Creating and modifying Master NGFW Engine and Virtual NGFW Engine elements
Virtual NGFW Engines are logically separate NGFW Enginess that run as virtual instances on a physical NGFW appliance. A Master NGFW Engine is a physical appliance that provides resources for Virtual NGFW Engines.
Network interface configuration
The network interface configuration for NGFW Engines is stored on the Management Server in the properties of Single Firewall,
Firewall Cluster, Single IPS, IPS Cluster, Single Layer 2 Firewall, Layer 2 Firewall
Cluster, Master NGFW Engine, and Virtual NGFW Engine elements.
Connecting NGFW Engines to the SMC
To maintain the security of your system, the NGFW Engines establish an authenticated and encrypted connection with Log Servers and
Management Servers.
Element-based network address translation (NAT)
Element-based NAT allows you to define NAT addresses in the properties of an element.
The NAT definitions define how firewalls translate network IP addresses.
Configuring the NGFW Engine tester
The NGFW Engine tester runs various checks on the NGFW Engine and initiates responses based on the success or failure of these
tests.
Engine permissions
You can set permissions to control the administration of the engines.
DNS Relay
DNS relay allows the firewall to provide DNS services for clients in internal networks.
Setting up SNMP for NGFW Engines
SNMP is a standard protocol that different equipment can use to send network management-related
information to each other. You can configure NGFW Engines to send SNMP traps to external equipment.
Setting up LLDP for NGFW Engines
Network devices can use the Link Layer Discovery Protocol (LLDP) to advertise their
identity, capabilities, and neighbors on a local area network.
Alias element translations for NGFW Engines
Alias elements can be used to represent other network elements in configurations.
The value an Alias takes in a configuration can be different on each NGFW Engine where the Alias is used.
Add-on features for NGFW Engines
There are several add-on features that you can use on Firewalls, IPS engines, Layer
2 Firewalls, Virtual Firewalls, Virtual IPS engines, and Virtual Layer 2 Firewalls.
Advanced NGFW Engine settings
Advanced settings cover various system parameters related to different features.
Routing
Use the Management Client to configure static or dynamic routing, and use a Multi-Link
configuration to manage and distribute inbound and outbound connections.
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic
and inspecting the content of traffic.
Users and authentication
User accounts are stored in internal databases or external directory servers. You
can use Forcepoint NGFW in the Firewall/VPN role or external authentication servers to authenticate users.
Virtual private networks
Forcepoint NGFW supports both policy-based and route-based VPN (virtual private network) tunnels
between VPN gateways. For full remote access, Forcepoint NGFW supports both IPsec and SSL VPN tunnels for VPN clients.
Maintenance and upgrades
Maintenance includes procedures that you do not typically need to do frequently.
Troubleshooting
Troubleshooting helps you resolve common problems in the Forcepoint NGFW and SMC .
Appendices
Creating and modifying Master NGFW
Engine and Virtual NGFW
Engine elements
Virtual NGFW Engines are logically separate NGFW Enginess that run as virtual instances on a
physical NGFW appliance. A Master NGFW Engine is a physical appliance that provides resources for
Virtual NGFW Engines.