SNMP traps and MIBs
You can use these SNMP traps and MIB objects with NGFW Engines.
| Trap name | Objects included | Description |
|---|---|---|
| fwPolicyInstall | fwSecurityPolicy | Policy was installed on the Firewall engine. |
| ipsPolicyInstall | ipsSecurityPolicy | Policy was installed on the IPS engine. |
| nodeBoot | - | Node bootup complete. |
| nodeHwmon | nodeHwmonEvent | Hardware monitoring system has detected problems. |
| nodeOffline | nodeOperState | Node changed to offline or standby state. |
| nodeOnline | nodeOperState | Node changed to online state. |
| nodeShutdown | - | Node is shutting down. |
| nodeTestFailure | nodeTestIdentity | Test subsystem reported a test failure on the node. |
| nodeFailedUserLogin | - | Logon failed on the firewall engine's console or through SSH. |
| nodeUserLogin | nodeLastLogin | Log on initiated on the engine's console or through SSH. |
| nodeUserLogout | - | Log off on the firewall engine's console or through SSH. |
| MIB | Role | Engine Version | Description |
|---|---|---|---|
| STONESOFT-SMI-MIB | - | 6.10 or earlier |
High-level registrations MIB. This MIB defines the top-level enterprise registrations for the Forcepoint NGFW products in the
.iso.org.dod.internet.private.enterprises.stonesoft branch (OID The other MIB modules depend on STONESOFT-SMI-MIB, so it is necessary to load STONESOFT-SMI-MIB first. |
| STONESOFT-NETNODE-MIB | FW, IPS, L2FW | 6.10 or earlier | Generic network node MIB. |
| STONESOFT-FIREWALL-MIB | FW, L2FW | 6.10 or earlier | Firewall application MIB. |
| STONESOFT-IPS-MIB | IPS | 6.10 or earlier | IPS application MIB. |
| FORCEPOINT-NGFW-ENGINE-MIB | FW, IPS, L2FW | 6.11 or later | Engine application MIB. |
Note: Traps and other Forcepoint NGFW or Secure SD-WAN specific SNMP OIDs are defined in FORCEPOINT-NGFW-ENGINE-MIB file. For more details, refer to the Enhanced SNMP Agent default in NGFW
Engine version 7.0 Knowledge Base article.