Install a Log Server

Continue the installation in the Installation Wizard to configure the options for the Log Server.

Steps

  1. Configure the settings, then click Next.
    Option Description
    Select Log Server IP Address Select the server’s IP address from the drop-down list. If you use IP address binding, the server’s license must be generated with this IP address as the binding.
    IP Address(es) of the Management Server(s) that will control this Log Server Enter the IP address of the Management Server that controls this server. If there are multiple Management Servers, enter the IP addresses as a comma-separated list.
    Certify the Log Server during the installation When selected, the server is automatically certified. If the components are installed on different computers and the Management Server is not immediately contactable, deselect this option to avoid connection attempts after installation. Certifying is mandatory for running the server.
    Port on which the Log Server will receive data Enter the port number that the server receives data on.
    Enable FIPS Configuration Restrictions When selected, restrictions for a FIPS-compatible environment are enabled.
    Note: This option only is for environments that are required to follow FIPS standards. Do not enable this option unless you have a specific reason to do so.
    Install the Log Server as a Service When selected, the server starts automatically.
  2. (Optional) Click Choose to browse to a different storage folder for log data.
    Note: Remote locations are not suitable for active storage, as quick and reliable access is required.
  3. Click Next.