Add static IPv6 addresses to Single Firewall interfaces

Depending on the type of interface, you can add one or more static IPv6 addresses to Single Firewall interfaces.

For more details about the product and how to configure features, click Help or press F1.

Steps

  1. In the navigation pane on the left, select Interfaces.
  2. Right-click a physical, VLAN, SSID, or port group interface and select New > IPv6 Address.
  3. In the IPv6 Address field, enter the IPv6 address.
    Tip: To resolve the IP address from a DNS name, right-click the field, then select Resolve From DNS Name.
  4. Enter the Prefix Length (0–128).
  5. Click OK.
  6. Click Save.
    Do not close the Engine Editor.

Next steps

Continue the configuration in one of the following ways:
  • Add more IP addresses.
  • Add other types of interfaces.
  • Select system communication roles for interfaces.
  • Bind engine licenses to the Single Firewall elements.