Engine Editor > Routing > Policy Routing
Use this branch to define policy routing for the Engine.
| Option | Definition |
|---|---|
| IPv4 Policy Routes or IPv6 Policy Routes | Enter the routing information in the appropriate table. Click Add to add a row to the table, or Remove to remove the selected row. Click Up or Down to move the selected element up or down. |
| Source IP Address | Enter the source IP address, which must be a specific address other than the default 0.0.0.0 that matches any IP address. Such configurations can be managed more easily using the standard routing tools in the Routing pane. |
|
Source Netmask
(IPv4 only) |
Enter the netmask for the source IP address. |
| Source Prefix
(IPv6 only) |
Enter the network prefix for the source IP address. |
| Destination IP Address | Enter the destination IP address. |
|
Destination Netmask
(IPv4 only) |
Enter the netmask for the destination IP address. |
| Destination Prefix
(IPv6 only) |
Enter the network prefix for the destination IP address. |
| Gateway IP Address | Enter the IP address of the device to which packets that match the source/destination pair are forwarded. |
| Comment (Optional) |
A comment for your own reference. |