Installing Filtering Service on Windows

Ensure you have prepared the machine as described in Preparing for installation. To install Filtering Service on a supported Windows platform:

Steps

  1. Log on to the machine with domain admin privileges.
  2. Download the Forcepoint Security Windows Installer ForcepointDLP1030Setup.exe:
    1. Log on to the Forcepoint Downloads page.
    2. Select DLP Core from the Product.
    3. Click Forcepoint Security Manager for DLP v10.3 from the Installer list.
      Note: Only latest version is available under Installer list. If you want to select the previous versions, then use Click here from DLP Core.
    4. Click Download in the Product Installer page to download the Forcepoint Security Installer ForcepointDLP1030Setup.exe.
  3. Right-click ForcepointDLP1030Setup.exe and select Run as administrator to launch the installer. After a few seconds, a progress dialog box appears, as files are extracted.
  4. On the Welcome screen, click Start.
  5. On the Subscription Agreement screen, select I accept this agreement, then click Next.
  6. If the machine has multiple NICs, on the Multiple Network Interfaces screen, select the IP address of the NIC that Forcepoint Security Solutions components should use for communication, then click Next.
  7. On the Installation Type screen, select Custom and then click Next.
  8. On the Select Components screen, select the following components, then click Next:
    • Filtering Service
    • User Service
    • Usage Monitor

    Optionally, you may also select:

    • Network Agent
    • State Server
    • DC Agent, Logon Agent, eDirectory Agent, or RADIUS Agent
    • Directory Agent (used by the Forcepoint Web Security Hybrid Module)
  9. On the Policy Server Connection screen, enter the IP address of the central Policy Server machine and the Policy Server communication port (55806, by default), then click Next.
  10. If you are installing Directory Agent, on the Policy Broker Connection screen, enter the IP address of the primary or standalone Policy Broker and its communication port (55880, by default), then click Next.
  11. On the Active Directory screen, indicate whether you are using Windows Active Directory to authenticate users in your network, then click Next.
  12. On the Computer Browser screen, indicate that the installer should attempt to start the service, then click Next.
  13. On the Integration Option screen, select Install Web Security to connect to Content Gateway, then click Next.
  14. If you are installing Network Agent, on the Network Card Selection screen, select the NIC that Network Agent should use to communicate with other Forcepoint Security Solutions components, then click Next.
  15. On the Filtering Feedback screen, indicate whether you want your software to send feedback to Forcepoint LLC, then click Next.
  16. On the Directory Service Access screen, enter the domain, user name, and password of an account that is a member of the Domain Admins group on the domain controller, then click Next.
    User Service, DC Agent, and Logon Agent use this information to query the domain controller for user and group information.
  17. On the Installation Directory screen, accept the default installation path, or click or select Choose to specify another path, and then click Next.

    The installation path must be absolute (not relative). The default installation path is C:\Program Files (x86)\Websense\Web Security\.

    The installer creates this directory if it does not exist.

    Important: The full installation path must use only ASCII characters. Do not use extended ASCII or double-byte characters.
  18. On the Pre-Installation Summary screen, verify the information shown, then click Next.
    The summary shows the installation path and size, and the components to be installed.
  19. A progress screen is displayed. Wait for the installation to complete.
  20. On the Installation Complete screen, click Finish.