Configuring Content Gateway to be a RADIUS client

Steps

  1. Go to Configure > My Proxy > Basic > General.
  2. In the Authentication section, click Radius On, and then click Apply.
  3. Navigate to Configure > Security > Access Control > Radius.
  4. Enter the hostname of your primary RADIUS server.
  5. Enter the port number through which Content Gateway communicates with the primary RADIUS server.
  6. Enter the key used for encoding.
  7. If you are using a secondary RADIUS server, enter the hostname, port, and shared key in the appropriate fields of the Secondary Radius Server (Optional) area.
  8. Click Apply.
  9. Click Restart on Configure > My Proxy > Basic > General.
    Note: In addition to performing these procedures, you must add the Content Gateway machine as a trusted client on the primary and secondary RADIUS servers and provide the shared key you want to use for the Content Gateway machine (the shared key must be the same one you specify in the procedure below). See your RADIUS server documentation.