If a single administrator ID and password for the Content Gateway manager is not sufficient, an administrator can create a list of user accounts that define who has access to the
Content Gateway manager and which activities they can perform.
Steps
-
In the Content Gateway manager, go to the tab.
-
Under Add New User, enter the name of the user allowed to access the Content Gateway manager.
-
Enter the password for the user, and then enter the password again in the New Password (Retype) field.
Passwords must be 8 to 15 characters and include at least one:
- Uppercase character
- Lowercase character
- Number
- Special character
Supported characters include:
! # % & ' ( ) * + , - . / ; < = > ? @ [ ] ^ _ { | } ~
The following special characters are not supported:
Space $ : ` \ "
-
Click Apply.
-
In the Access drop-down list of the user table, select which Content Gateway manager activities the user can perform:
- Select No Access to disable Content Gateway manager access for the user.
- Select Monitor Only to allow the user to view statistics from the Monitor tab only.
- Select Monitor and View Configuration to allow the user to view statistics from the Monitor tab and to view configuration options from the Configure
tab.
- Select Monitor and Modify Configuration to allow the user to view statistics from the Monitor tab and to change configuration
options from the Configure tab.
-
Click Apply.
-
Repeat this procedure for each user allowed to access the Content Gateway manager.