Setting up a mirror port on an X10G appliance

In X Series appliances with the switch configuration port installed, you can use the CLI or the API to enable the Decryption Port Mirror feature with the N interface as an SSL mirror port.

Steps

  1. Power off the X10G blade.
  2. Remove and open the blade.
  3. Insert the network module into the blade at the B position.
  4. Place the blade back into the chassis.
  5. Insert the pass-through module into the B1 position of the chassis.

    Connect the network cable to the number n port of the pass-through module in the B1 position.