Remediation

Use the Settings > General > Remediation page in the Data Security module of the Forcepoint Security Manager to define the location of the syslog server and mail release gateway used for remediation.

1. Under Syslog Settings, enter the IP address or hostname of the syslog server, and the logging Port.
2. To set the origin of syslog messages, select Use syslog facility for these messages, then use the drop-down menu to select the type of message to appear in the syslog:
   • User-level Messages (#1) logs generic user-level messages, such as “username/password expired”.
   • Security/Authorization Messages (#4) logs authentication- and authorization-related commands, such as “authentication failed for admin user”.
   • Security/Authorization Messages (#10) logs non-system authorization messages inside a protected file (for information of a sensitive nature, such as passwords).
   • Local use 0-7 (#16-23) specifies unreserved facilities available for any local use. Processes and daemons that have not been explicitly assigned a facility can use any of the “local use” facilities. Configuration is done in the syslog.conf file.

   To send incident data to the syslog, select Audit Incident > Send Syslog Message in the action plan for the policy.

3. Click Test Connection to send the syslog server a verification test message.
4. Under Release Quarantined Emails, specify which gateway to use when releasing a quarantined email message.
   • The default is Use the gateway that detected the incident. This gateway could be Forcepoint Email Security or the protector MTA, depending on your subscription.
   • To define a specific gateway, select Use the following gateway, then enter the gateway IP address or hostname and Port.
5. If only recipients of a message should be able to release it from quarantine, select Validate user before releasing message.

   The system then ensures that the person attempting to release a message is a recipient of the message, and therefore authorized. Unauthorized users receive an email notification that they are not allowed release the message.

6. Click OK to save your changes.

Syslog messages can be sent to an SIEM tool if desired. They are compatible with both ArcSight Common Event Format (CEF) and Audit Quality SIEM format.

The ArcSight CEF message includes the following information for each incident:

CEF:0|Forcepoint|Forcepoint DLP|8.3|{id}|DLP Syslog|{severity}| act={action} duser={destinations} fname={attachments} msg={details} suser={source} cat={policyCategories} sourceServiceName={channel}analyzedBy={policyEngineName} loginName={name}sourceIp={ip}

The ArcSight Audit Quality SIEM message adds additional information for each incident:

severityType=MEDIUM sourceHost=MNG_ENDPOINT_1 productVersion=8.3 maxMatches=6 timeStamp=2015-03-11 16:33:48.333 destinationHosts=ACCOUNTS.GOOGLE.COM,10.0.17.2 apVersion=8.3