Adding an IP address group

The page Settings > Inbound/Outbound > IP Groups is used to view and add an IP address group.

1. On the page Settings > Inbound/Outbound > IP Groups, click Add. The Add IP Group page displays.
2. In the field IP Address Group Name, enter a name for the new IP address group. This field is required.
3. In the field Description, enter a brief description of the IP address group.
4. In the section IP Address Group, add a predefined IP address group; from the field IP address file, click Browse and navigate to the desired text file.

   The file format should be one IP address per line, and its maximum size is 10 MB

   Note:

   The default Encryption Gateway IP address group supports only the entry of individual IP addresses. Subnet address entries are considered invalid and are not accepted for this IP address group.

   Subnet addresses may be entered for other default and custom IP address groups.

5. Manually add IP address entries; in the field IP address, enter an individual IP address and click >.
   The information is added to the Added IP Addresses box on the right.
6. Click OK.

   The settings are saved.