Select system communication roles for Single Engine interfaces

Select which IP addresses are used for particular roles in system communications.

For example, you can select which IP addresses are used in communications between the Engine and the Management Server.

The interfaces you have defined are shown as a tree-table on the Interfaces tab. Global interface options have codes in the tree-table.

Table 1. Interface option codes
Code Description
A The interface that has the IP address used as the identity for authentication requests.
C The interfaces that have the primary and backup control IP addresses.
O The default IP address for outgoing connections.
Note: You cannot use layer 2 physical interfaces on engines for system communications.

For more details about the product and how to configure features, click Help or press F1.

Steps

  1. In the navigation pane on the left, select Interfaces > Interface Options.
  2. Select the interface options.
    1. From the Primary drop-down list, select the primary control IP address that the Engine uses for communications with the Management Server.
    2. (Optional, recommended) From the Backup drop-down list, select a backup control IP address that the Engine uses for communications with the Management Server if the primary control IP address fails.
    3. If the Engine's primary control IP address and backup control IP address are dynamic or if the Engine is in an environment where only the Engine can initiate connections to the Management Server, select Node-initiated contact to Management Server.
      When this option is selected, the engine opens a connection to the Management Server and maintains connectivity.
    4. From the Identity for Authentication Requests drop-down list, select the IP address that identifies the Engine to external authentication servers.
      Note: This selection has no effect on routing.
    5. (Optional) From the Source for Authentication Requests drop-down list, select the IP address that identifies the engine when it sends an authentication request to an external authentication server over a VPN.
      Note: This selection has no effect on routing.
    6. From the Default IP Address for Outgoing Traffic drop-down list, select the IP address that nodes use if they have to initiate connections through an interface that has no Node Dedicated IP address.
  3. Click Save, then close the Engine Editor.

Next steps

Bind engine licenses to the Single Engine elements.