Add integrated switches for Single Engines
An integrated switch represents the switch functionality on purpose-built Secure SD-WAN Engine appliances. Integrated switches eliminate the need for an external switch device and reduce costs and clutter.
The switch functionality is only supported on specific Secure SD-WAN Engine appliances that have a hardware or software
integrated switch. For more information, see the model-specific Forcepoint FlexEdge Secure SD-WAN Hardware Guide for your Secure SD-WAN Engine appliance.
- On Secure SD-WAN Engine appliances that have hardware integrated switches, you can configure one integrated switch and one or more port group interfaces.
- On Secure SD-WAN Engine appliances that have software integrated switches, you can configure one or more integrated switches, and one port group interface on each integrated switch.
You can only use the integrated switch if the appliance has been configured as a Single Engine.
Note: The ports in the integrated switch do not support VLAN tagging or PPPoE.
You cannot use ports on the integrated switch as the control interface.
For more details about the product and how to configure features, click Help or press F1.
Steps
Next steps
Add port group interfaces to the switch.
Switch Properties dialog box
Use this dialog box to configure the properties of integrated switches.
Option | Definition |
---|---|
Switch ID | Specifies the ID of the switch.
Note: Select the switch ID according to the
Secure SD-WAN switch type. For example, the switch ID of the
Secure SD-WAN 110 appliance is 0. See the hardware guide for your appliance for more information.
|
Switch Type | Specifies the type of the Secure SD-WAN switch. |
Comment | An optional comment for your own reference. |