Network Security Platform 7.3.0 Online Help

Home
Security Engine configuration
You can create and modify Engines, IPS engines, Layer 2 Engines, Master Engines and Virtual Security Engines. You can configure the Security Engine properties, activate optional features, and configure advanced Security Engine settings.
Configuring the Security Engine tester
The Security Engine tester runs various checks on the Security Engine and initiates responses based on the success or failure of these tests.

About this Help
This online help was created for Forcepoint Network Security Platform, version 7.3.0.
Introduction to the Forcepoint Network Security Platform solution
Before setting up Forcepoint Network Security Platform, it is useful to know what the different components do and what engine roles are available.
Deployment
Before you can set up the system and start configuring elements, you must consider how the different SMC components should be positioned and deployed.
Setting up
After deploying the SMC components, you are ready to start using the SMC Client and carrying out some of the first configuration tasks.
Monitoring
You can use the SMC to monitor system components and third-party devices. You can also view and filter logs, and create Reports from them.
Controlling Security Engines
You can command and set options for engines through the SMC Client or on the engine command line. You can also stop traffic manually.
SMC configuration
SMC Manager configuration allows you to customize how the SMC components work.
Security Engine configuration
You can create and modify Engines, IPS engines, Layer 2 Engines, Master Engines and Virtual Security Engines. You can configure the Security Engine properties, activate optional features, and configure advanced Security Engine settings.
- Creating and modifying Security Engines
  Security Engine elements contain the configuration information that is directly related to the Engines, IPS engines, and Layer 2 Engines. The configuration information includes interface definitions, cluster mode selection, tester settings, and other options specific to the Security Engine.
- Creating and modifying Master Engine and Virtual Engine elements
  Virtual Engines are logically separate Security Engines that run as virtual instances on a physical Security Engine appliance. A Master Engine is a physical appliance that provides resources for Virtual Engines.
- Network interface configuration
  The network interface configuration for Security Engines is stored on the Management Server in the properties of Single Engine, Engine Cluster, Single IPS, IPS Cluster, Single Layer 2 Engine, Layer 2 Engine Cluster, Master Security Engine, and Virtual Security Engine elements.
- Connecting Security Engine to the SMC
  To maintain the security of your system, the Security Engine establish an authenticated and encrypted connection with Log Servers and Management Servers.
- Element-based network address translation (NAT)
  Element-based NAT allows you to define NAT addresses in the properties of an element. The NAT definitions define how engines translate network IP addresses.
- Configuring the Security Engine tester
  The Security Engine tester runs various checks on the Security Engine and initiates responses based on the success or failure of these tests.
  - Getting started with the Security Engine tester
    The Security Engines can be configured with periodic self-tests to make sure that each Engine, IPS engine, Layer 2 Engine, and Master Security Engine is functioning correctly.
  - Specify global tester settings
    The global settings of the tester have default values that you can override to meet your needs.
  - Add Security Engine tests
    As well as test-specific settings, some tests share common settings.
  - Configuring additional test-specific settings for Security Engine tests
    The settings available to you vary according to the test you select. Some of the tests have additional, test-specific settings.
  - View configured Security Engine tests
    The test entries that you have configured are displayed in the Tester pane of the Engine Editor.
  - Remove Security Engine tests
    Removing a test permanently removes the test settings from the selected Security Engine.
  - Disable or enable Security Engine tests
    You can disable or enable any individual test or all tests that are run on a specified node.
- Engine permissions
  You can set permissions to control the administration of the engines.
- DNS Relay
  DNS relay allows the engine to provide DNS services for clients in internal networks.
- Setting up SNMP for Security Engines
  SNMP is a standard protocol that different equipment can use to send network management-related information to each other. You can configure Security Engines to send SNMP traps to external equipment.
- Setting up LLDP for Security Engines
  Network devices can use the Link Layer Discovery Protocol (LLDP) to advertise their identity, capabilities, and neighbors on a local area network.
- Alias element translations for Security Engines
  Alias elements can be used to represent other network elements in configurations. The value an Alias takes in a configuration can be different on each Security Engine where the Alias is used.
- Add-on features for Security Engines
  There are several add-on features that you can use on Engines, IPS engines, Layer 2 Engines, Virtual Engines, Virtual IPS engines, and Virtual Layer 2 Engines.
- Advanced Security Engine settings
  Advanced settings cover various system parameters related to different features.
Routing
Use the SMC Client to configure static or dynamic routing, and use a Multi-Link configuration to manage and distribute inbound and outbound connections.
Traffic inspection policies
Policies are key elements that contain rules for allowing or blocking network traffic and inspecting the content of traffic.
Users and authentication
User accounts are stored in internal databases or external directory servers. You can use Forcepoint Network Security Platform in the Engine/VPN role or external authentication servers to authenticate users.
Virtual private networks
Forcepoint Network Security Platform supports both policy-based and Route-based Tunnels between VPN gateways. For full remote access, Forcepoint Network Security Platform supports both IPsec and SSL VPN tunnels for VPN clients.
Maintenance and upgrades
Maintenance includes procedures that you do not typically need to do frequently.
Troubleshooting
Troubleshooting helps you resolve common problems in the Forcepoint Network Security Platform and SMC.
Appendices

Configuring the Security Engine tester

The Security Engine tester runs various checks on the Security Engine and initiates responses based on the success or failure of these tests.

Getting started with the Security Engine tester
The Security Engines can be configured with periodic self-tests to make sure that each Engine, IPS engine, Layer 2 Engine, and Master Security Engine is functioning correctly.
Specify global tester settings
The global settings of the tester have default values that you can override to meet your needs.
Add Security Engine tests
As well as test-specific settings, some tests share common settings.
Configuring additional test-specific settings for Security Engine tests
The settings available to you vary according to the test you select. Some of the tests have additional, test-specific settings.
View configured Security Engine tests
The test entries that you have configured are displayed in the Tester pane of the Engine Editor.
Remove Security Engine tests
Removing a test permanently removes the test settings from the selected Security Engine.
Disable or enable Security Engine tests
You can disable or enable any individual test or all tests that are run on a specified node.

Copyright © 2025 Forcepoint LLC