Activate anti-spoofing for routable IP addresses

In rare cases, you might need to disable or remove an allowed IP address for an Engine.

The anti-spoofing configuration shows the allowed addresses for each interface. There is rarely any need to change the automatically added entries. The preferred way of preventing routing for IP addresses is to make changes in the routing configuration.

Note: Disabling or removing elements in the anti-spoofing configuration prevents access. The IP addresses that a disabled or removed element represents are considered to be spoofed addresses.

Steps

  1. Right-click a SMCaaS, then select Edit <element type>.
  2. Browse to Routing > Anti-spoofing.
  3. Right-click the element, then select Remove or Disable.
    If you disabled an element, you can re-enable the element in the same way.
  4. Click Save and Refresh to transfer the configuration.