Content migration in progress, completing by midnight IST on 17 November 2026.
Home
Routing
This section guides you through configuring static or dynamic routing and managing
inbound and outbound traffic connections using Multi-Link configurations in SMCaaS to ensure network connectivity is optimized, load balanced, and highly available.
Advanced routing topics
Advanced routing capabilities in SMCaaS, including configurations for multiple routes
with metrics or ECMP, forced next hop routing, policy-based routing, multicast routing,
and dynamic routing protocols that enable engines to automatically adapt to network
topology changes.
Configuring dynamic routing
With dynamic routing, Engines automatically change their routing when the network
topology changes. The Engines can also exchange information about appropriate routing
paths.
Introduction to SMC as a Service
The SMC as a Service provides centralized access for configuring, managing, logging,
and monitoring NGFW s that secure network connectivity and control business operations.
Getting Started
The Getting Started section provides the information and procedures for downloading
software, acquiring licenses, and installing both software and physical appliances
to deploy SMCaaS for securing network connectivity and controlling business operations.
Routing
This section guides you through configuring static or dynamic routing and managing
inbound and outbound traffic connections using Multi-Link configurations in SMCaaS to ensure network connectivity is optimized, load balanced, and highly available.
Configuring routing and anti-spoofing
Routing defines through which next hop router the Engine forwards traffic from a source address to a destination address. Anti-spoofing
defines which addresses are considered valid source addresses for the networks connected
to each interface.
Outbound traffic management
You can use Multi-Link to distribute outbound traffic between multiple network connections
and to provide high availability and load balancing for outbound traffic.
Inbound traffic management
Inbound traffic management ensures that services remain available even when one or
more servers or NetLinks fail, and balances the load of incoming traffic more efficiently
between a group of servers. Inbound traffic management is not supported on layer
2 physical interfaces on Engines.
Dynamic link selection
When you use Multi-Link for outbound traffic management or Multi-Link VPNs, SMCaaS can dynamically select the NetLink or VPN link that best matches the quality
requirements of traffic.
Advanced routing topics
Advanced routing capabilities in SMCaaS, including configurations for multiple routes
with metrics or ECMP, forced next hop routing, policy-based routing, multicast routing,
and dynamic routing protocols that enable engines to automatically adapt to network
topology changes.
Using metrics or ECMP on multiple routes to the same destination
You can configure multiple routes through different next hop gateways to the same
destination.
Configure Forced Next Hop routing
The Forced Next Hop option can be used to force forward traffic to a specific tunnel,
or next hop IP address overriding normal routing.
Configure policy routing
Policy routing allows you to route traffic based on both source and destination IP
address. Policy routing is useful when you want to configure a different route for
a destination based on the source address.
Configuring multicast routing
The Engine supports static multicast, IGMP-based multicast forwarding (IGMP proxying),
and multicast routing using protocol-independent multicast (PIM). You can also configure
dynamic multicast routing using the Free Range Routing (FRR) Suite on the command
line.
Configuring dynamic routing
With dynamic routing, Engines automatically change their routing when the network
topology changes. The Engines can also exchange information about appropriate routing
paths.
Policy Creation and Administration
Monitoring
This section covers monitoring engines and system health, viewing and exporting logged
data, generating reports from logs and statistics, and filtering data to analyze network
traffic and application performance in SMCaaS.
VPN
Configuring dynamic routing
With dynamic routing, Engines automatically change their routing when the network topology changes. The Engines can also exchange information about appropriate routing paths.