Enabling WCCP v2 in Content Gateway

After you have configured your WCCP v2 routers, these steps remain:

Steps

  1. Enabling WCCP in the Content Gateway Manager:
    1. Go to the Configure > My Proxy > Basic > General tab.
    2. Under Features > Networking, locate WCCP and click On, then Apply. Do not restart Content Gateway.
  2. Configuring service groups in the Content Gateway manager
  3. Restarting Content Gateway.
    Important:

    Before you restart Content Gateway, make sure that your configuration meets the following requirements:

    • Cisco IOS devices are running a very recent version of IOS with all appropriate patches applied.
    • WCCP routers are programmed with the correct service groups and other features.