Chassis switch cabling

The primary port is A1 Te1/2/2 (the lower 10Gb port; P1).

The secondary port, for optional switch high availability, is A2 Te1/2/2 (P2).

With 10Gb ports use SFP+ cables.

When VLAN is enabled, after running the X10G switch configuration tool, P1 and P2 are configured as trunk ports.

Important: In the X10G switch configuration tool, when prompted for the external port, select the option for Te1/2/2.

When cabling is complete, configure the switch with the X10G switch configuration tool.