Start the Secure SD-WAN Configuration Wizard to configure settings for the Secure SD-WAN engine.
Steps
-
If you are configuring a physical Secure SD-WAN Engine appliance, connect the appliance to a laptop or other client device.
-
Connect an Ethernet cable from the client device to the physical port labeled LAN (generally port number 2) on the Secure SD-WAN
Engine appliance. If the appliance does not have the port labeled LAN, then use the port eth0_1. Also, you can do the following:
- If the Secure SD-WAN Engine appliance does not have the port eth0_1, then use the port eth1_0.
- If you use a non-modular interfaces, then use the port eth1.
-
Connect the other network cables to the Secure SD-WAN Engine appliance.
-
Turn on the Secure SD-WAN Engine appliance.
-
To start the web browser version of the Secure SD-WAN Configuration Wizard, open a web browser on the client device, then connect to https://169.254.169.169.
It might take some time for the web page to load.
-
When the Secure SD-WAN Configuration Wizard offers a web browser client certificate, accept the certificate.