Create and modify an access list

Steps

  1. Navigate to the page Settings > Inbound/Outbound > Connection Control.
  2. From the section Allow Access List Options, select an IP group name from the pull-down menu IP group.
    The IP addresses in the group display in the list of IP addresses list and the Edit button is enabled.
  3. Click Edit.
    The Edit IP Groups page displays to configure the IP addresses. See Editing an IP address group.
  4. In the section IP Address Group, add a predefined IP address group; from the field IP address file, click Browse and navigate to the desired text file.

    The file format should be one IP address per line, and its maximum size is 10 MB.

    Because mail from the Trusted IP Addresses group bypasses additional email analysis, that group should not be entered in the Allow Access List. See Managing domain and IP address groups.

  5. Manually add IP address entries; in the field IP address, enter an individual IP address and click >.

    The information is added to the Added IP Addresses box on the right.

    Note: Any changes made here to an IP address group are reflected on the page Settings > Inbound/Outbound > IP Groups.
  6. Export the access list to a location in your network; click Export.
  7. Delete an IP address from the Added IP Addresses list; select the IP address and click Remove.
  8. Click OK.
    The Connection Control page displays with the newly configured IP addresses.
  9. Click OK.
    The settings are saved.