Configuring an IKE crypto profile

Configure an IKE crypto profile using the IKE Parameters from the Forcepoint ONE SSE.

Steps

  1. Navigate to Network > Network Profiles > IKE Crypto > Add.
  2. Configure the recommended IKE settings as shown below.


    You can obtain the IKE Parameters from Forcepoint ONE SSE by navigating to the Analyze > Tunnels > Setup Info > Supported Settings section after configuring the IPsec tunnels.

  3. To save the IKE crypto profile, click OK.

Result

You have an IKE crypto profile created. In this example, FOne_IKE_Profile