Step4: Upload DPS license JSON on Forcepoint ONE SSE

After the Forcepoint DLP and Forcepoint ONE SSE CASB integration is configured and the DLP Cloud Application license is active, you need to upload the same DPS license JSON file provided with your Forcepoint order confirmation mail as part of the on-boarding process or requested from Forcepoint Technical Support on the Forcepoint ONE SSE.

Follow the steps below to upload DPS license JSON file on the Forcepoint ONE SSE:

Steps

  1. Log into the Forcepoint ONE SSE.
  2. Navigate to the Settings > DLP page.
  3. On the Forcepoint DLP tile, under License Settings, click Upload JSON File.
  4. Navigate to the JSON file and select it.
  5. At the end of the Forcepoint DLP tile, click Save.

    Once you have saved the JSON file, you can find DPS Tenant ID, an option to verify DPS connection and another option to update the JSON file.

    Note: You can share the DPS Tenant ID with the Forcepoint Technical Support while troubleshooting an issue.
  6. Click Very Connection to validate JSON and to check the connection to the DPS tenant.
    After successful validation of the license JSON file, a green checkmark appears along with the Connection Successful message.

    If the validation of the license JSON file failed as it was not able to make connection with DPS, then a red mark appears along with the Connection failed message.