Viewing ZTNA connectors

All the installed and configured ZTNA connectors can be seen under Analyze > Connectors page.

After installing and configuring the ZTNA connector on the server, you can monitor ZTNA connector's health and data flow under Analyze > Connectors.

When the ZTNA connector is properly connected to server, it shows green checkmark under Status column. Otherwise, it shows red crossmark.

Note: If the connector displays yellow triangle with exclamation mark, then you should run the setup script with the sudo ./setup_ztna.sh command and on the menu, select Update Container Software Configure to resolve the issue.

Click on the connector to view various details of the ZTNA connector.

The actual CPU, memory, machine load and so on of your connectors is displayed, which provides more accurate guidance for sizing the connector for your specific applications using that connector.

You can click Clear Counters under Cumulative Traffic section to clear the data flow values and to monitor whether the data is flowing or not.