Configuring DDR Rules

Create Scan Configuration

To configure DDR rules, follow these steps:
  1. Navigate to DDR tab.
  2. Under the DDR tab, select Create Scan Configuration to connect to the data sources to be monitored.

  3. Define Scopes: Specify the data sources that will be connected.
  4. Verify Configuration: Ensure that at least one data source is successfully connected. A green checkmark will confirm the completion.

Check for Incoming Events

Once the scan configuration is complete:
  1. Go to Administration > Live Events > Streaming to view DDR streaming events.

  2. Monitor Event Activity: Filter events by source, username, action type (create, update, delete), and event type.