Network service type

The following table provides information about the network service type that is supported when creating a custom network service.

Table 1.
Network service type Option Description
ICMP/ICMPv6 Name Enter a name for the network service.
Description Enter a description for the network service.
ICMP Type The ICMP type number for the control message.
ICMP Code The ICMP code for the control message.
IP Protocol Name Enter a name for the network service.
Description Enter a description for the network service.
IP Protocol number The IP protocol number, from the Protocol field of an IPv4 header, or the Next Header field of an IPv6 header.
Protocol The protocol assigned to this service. Type or click to select a protocol from the options that are available, or click x against an element in this field to remove it.
Note:

You can also create a new protocol, when you select a protocol. To create a protocol, do the following:

  1. Click New, and select an protocol type. The new protocol type dialog-box is displayed.
  2. Configure the fields in the dialog-box as per the requirement. For more details on the fields, refer to the Protocol agent field details topic in the Forcepoint ONE | Firewall online help documentation.
  3. Click Save to save the changes or click Cancel to discard the changes.
TCP/UDP Name Enter a name for the network service.
Description Enter a description for the network service.
Min/max source port

Specifies the source port or port range. To match a single port, enter it in the first field and leave the other field empty. To enter a range, enter a value in both fields.

Note: Either source or destination port is mandatory.
Min/max destination port

Specifies the destination port or port range. To match a single port, enter value in the first field and leave the other field empty. To enter a range, enter a value in both fields.

Note: Either source or destination port is mandatory.
Protocol agent The protocol agent assigned to this service. Type or click to select a protocol agent from the options that are available, or click x against an element in this field to remove it.
Note:

You can also create a new protocol agent, when you select a protocol agent. To create a protocol agent, do the following:

  1. Click New, and select an protocol agent type. The new protocol agent type dialog-box is displayed.
  2. Configure the fields in the dialog-box as per the requirement. For more details on the fields, refer to the Protocol agent field details topic in the Forcepoint ONE | Firewall online help documentation.
  3. Click Save to save the changes or click Cancel to discard the changes.
Service Group Name Enter a name for the network service.
Description Enter a description for the network service.
Services It is collections of network services that fulfill a specific function. This can be system-defined or user-defined.
Note: If required, click the New menu to create a new network service to assign to the service group.